-
Three essential puck-preparation tools. One compact espresso workflow.
The BOOKOO PuckGo 3-in-1 Tamper combines a calibrated impact tamper, retractable WDT distribution tool and magnetic dosing ring into one compact puck-preparation system designed for 58.5 mm-class espresso baskets.
Instead of keeping a separate tamper, dosing funnel and WDT tool across the coffee bar, PuckGo integrates all three steps into a single organized system: dose cleanly, distribute the coffee, then tamp with a repeatable 33 lb force.
3-in-1 Puck Preparation System
PuckGo combines three of the most common espresso preparation tools: a magnetic dosing ring, a retractable WDT distribution tool and a self-aligning impact tamper.
Calibrated 33 lb Impact Tamper
The impact tamper uses a vertical separation mechanism calibrated to approximately 33 lb of tamping force. Once the mechanism activates, it provides audible feedback and automatically resets for the next tamp.
Self-Aligning Flat Base
A self-aligning levelling plate helps keep the tamper vertical against the basket, reducing the angled tamping errors that can occur with a conventional handheld tamper.
Retractable WDT Tool
The integrated Weiss Distribution Technique tool helps break apart clumps and redistribute freshly ground coffee before tamping.
Its needles retract back into the PuckGo body for convenient storage, keeping sharp WDT needles protected when they are not being used.
Replaceable 0.3 mm & 0.4 mm Needles
The WDT tool comes configured with 0.4 mm needles and includes replacement needles in both 0.3 mm and 0.4 mm diameters, allowing the tool to be serviced and customized over time.
Magnetic Dosing Ring
The dosing ring attaches magnetically to a compatible portafilter basket and creates a taller working area for grinding and WDT distribution, helping keep loose coffee grounds inside the basket instead of on the counter.
Anti-Static Coating
BOOKOO uses an anti-static coating on the dosing ring to help reduce coffee grounds clinging to the funnel during puck preparation.
58.5 mm-Class Compatibility
BOOKOO markets the PuckGo for Flair 58 and other compatible 58.5 mm espresso baskets. The manufacturer's technical specification lists the portafilter adaptation at 58.35 mm.
Because precision baskets can vary slightly in internal diameter and wall shape, confirm fit if your basket uses unusually tight tolerances.
304 Stainless Steel & Aluminum Construction
The PuckGo combines 304 stainless steel with aluminum components for a solid, compact tool that weighs approximately 446 grams.
Compact Integrated Storage
The WDT tool stores magnetically within the main assembly, while the dosing ring and tamper can be used together or separately depending on your preferred espresso workflow.
Silicone Base Included
A silicone mat is included to protect the stainless-steel tamper base when the PuckGo is stored on the coffee bar.
Key Features
- 3-in-1 espresso puck preparation system
- Impact tamper
- Retractable WDT distribution tool
- Magnetic dosing ring
- Flat tamper base
- Self-aligning tamping design
- Calibrated approximately 33 lb tamp force
- Audible impact feedback
- Automatic tamper reset
- Anti-static dosing ring coating
- WDT tool supplied with 0.4 mm needles
- 0.3 mm replacement needles included
- 0.4 mm replacement needles included
- 304 stainless steel and aluminum construction
- Compatible with Flair 58 and other compatible 58.5 mm baskets
- Manufacturer technical adaptation: 58.35 mm
- Silicone protective mat included
Technical Specifications
- Brand: BOOKOO
- Product: PuckGo 3-in-1 Tamper
- Model: TP58
- Nominal Size: 58.5 mm
- Technical Portafilter Adaptation: 58.35 mm
- Base Type: Flat
- Tamp Force: Approx. 33 lb
- Tamper Type: Self-Aligning Impact Tamper
- WDT Tool: Retractable / Magnetic
- Installed WDT Needle Size: 0.4 mm
- Replacement Needle Sizes: 0.3 mm and 0.4 mm
- Dosing Ring: Magnetic
- Dosing Ring Coating: Anti-Static
- Materials: 304 Stainless Steel / Aluminum
- Weight: Approx. 446 g
- Overall Diameter: Approx. 77 mm
- Overall Height: Approx. 106 mm
- Recommended Use Environment: 0–40°C
- Colour: Black / Stainless Steel
- Designed and Made In: China
What's Included
- 1 BOOKOO PuckGo impact tamper
- 1 magnetic dosing ring
- 1 retractable WDT tool with 0.4 mm needles
- Replacement 0.3 mm WDT needles
- Replacement 0.4 mm WDT needles
- 1 silicone protective mat
Recommended Puck Prep Workflow
- Attach the magnetic dosing ring to your compatible portafilter basket.
- Grind or transfer the desired dose into the basket.
- Remove the WDT tool from the PuckGo body.
- Distribute the coffee evenly using the WDT needles.
- Retract the needles and return the WDT tool to its magnetic storage position.
- Gently tap the portafilter vertically if needed to settle the coffee.
- Place the PuckGo tamper vertically into the basket or dosing ring.
- Press downward until the impact mechanism activates and provides audible feedback.
- BOOKOO recommends two consecutive tamps.
- Remove the tamper and dosing ring, then proceed with espresso extraction.
Care & Maintenance
- Clean using a dry brush only
- Do not wash the PuckGo with water
- Do not immerse the tamper, dosing ring or WDT assembly
- Do not disassemble the impact tamper mechanism
- Avoid dropping the tool
- Avoid excessive force beyond normal tamping operation
- Handle replacement WDT needles carefully because they are sharp
- Keep away from children
PuckGo vs. Separate Puck Prep Tools
| Feature | BOOKOO PuckGo | Separate Tools |
|---|---|---|
| Tamper | Integrated calibrated impact tamper | Separate purchase |
| WDT Tool | Integrated retractable WDT | Separate purchase |
| Dosing Ring | Integrated magnetic ring | Separate purchase |
| Tamping Force | Approx. 33 lb calibrated impact | Depends on tamper and technique |
| Alignment | Self-aligning | Depends on tamper design |
| Storage | Compact integrated system | Multiple tools on the coffee bar |
Ideal For
- Home espresso enthusiasts
- Flair 58 users
- 58.5 mm precision-basket users
- Baristas looking for repeatable tamp pressure
- Customers who use WDT before tamping
- Small coffee stations where organization matters
- Customers who want one puck-prep tool instead of three separate accessories
Frequently Asked Questions
1. What does the BOOKOO PuckGo include?
It combines an impact tamper, magnetic dosing ring and retractable WDT distribution tool in one system.
2. What size espresso basket is it designed for?
BOOKOO markets the PuckGo as a 58.5 mm product. Its technical manual lists a 58.35 mm portafilter adaptation.
3. Will it fit a Flair 58?
Yes. BOOKOO and Cafuné specifically identify the PuckGo as compatible with the Flair 58.
4. Will it fit every 58 mm basket?
Not necessarily. It is intended for 58.5 mm-class baskets, and basket tolerances vary by manufacturer. Confirm your basket dimensions if compatibility is uncertain.
5. How much tamping force does it apply?
The impact mechanism is calibrated to approximately 33 lb of tamping force.
6. Is the tamper self-leveling?
Yes. A levelling plate helps keep the tamper aligned vertically with the basket during compression.
7. How do I know when the tamp is complete?
The impact mechanism provides audible feedback when it activates and then automatically resets.
8. How many times should I tamp?
BOOKOO's user manual recommends two consecutive tamps.
9. What is the WDT tool for?
The WDT tool breaks apart coffee clumps and redistributes the grounds before tamping to help create a more even coffee bed.
10. What size WDT needles are included?
The tool comes with 0.4 mm needles installed and replacement needles in both 0.3 mm and 0.4 mm sizes.
11. Are the WDT needles replaceable?
Yes. BOOKOO provides instructions for removing and replacing the needles.
12. Does the WDT tool store inside the tamper?
Yes. The WDT assembly retracts and stores magnetically as part of the PuckGo system.
13. Is the dosing ring magnetic?
Yes. Powerful magnets hold the dosing ring onto compatible portafilter baskets.
14. Does the dosing ring have an anti-static coating?
Yes. BOOKOO specifies an anti-static coating intended to help reduce coffee grounds sticking to the ring.
15. What is the tamper made from?
The PuckGo uses 304 stainless steel and aluminum components.
16. How much does it weigh?
The complete PuckGo weighs approximately 446 grams.
17. What are its dimensions?
BOOKOO lists overall dimensions of approximately 77 mm in diameter by 106 mm high.
18. Can I use the tamper, WDT and dosing ring separately?
Yes. BOOKOO states that the three components can be used independently or together.
19. Can I wash the PuckGo under water?
No. BOOKOO specifically instructs users to clean the product with a dry brush and not wash it with water.
20. Is the tamper dishwasher safe?
No. The product should not be washed with water or placed in a dishwasher.
21. Does it come with a protective base?
Yes. A silicone protective mat is included for the tamper base.
22. What warranty does it have?
BOOKOO provides a one-year limited manufacturer's warranty against defects in materials and workmanship under normal use.
Recommended Product Images
Informations supplémentaires sur la politique de garantie